Wiring Devices

This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.

Limited one year warranty

This locking power cord features a molded L5-20P plug. The equipment end has the removed outer jacket for easy hard wiring or attaching an assembly connector for a custom cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

This power supply cord has a NEMA L6-30 plug and the outer jacket removed on the female end of the cord for easy hard wiring or attaching an assembly connector. This configuration is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, as well as many electrical vehicle chargers.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

This threaded sealing collar bridges the connection between two 50A power cords equipped with weatherproof boots and rings to provide maximum water protection. It is ideal for running multiple marine, RV, or temp power cords over extended lengths.

Limited one year warranty

This watertight boot is designed to fit over 50A plugs and connectors, including the common 14-50 and SS2-50 configurations. It includes a threaded ring that screws over an inlet or a sealing collar on another cord to prevent water damage at the connection.

This weatherproof boot is designed for use with 30 amp male plugs. Use when wiring a bladed grab or locking plug on to a cord to create a weather tight seal. The cutting rings on the base of the boot provide marks for different cable gauges, ensuring a tight fit around the cord.

This weatherproof boot and ring combo is designed to work with female locking connectors that are rated for 30 amps. The included threaded ring screws around an inlet or a sealing collar on a cord to prevent water damage at the connection.

Limited one year warranty

This bright yellow weatherproof boot covers the female connector of a power cord that will be exposed to the elements. It is suitable for wiring device systems with a bladed grab cord type and fits most 30A locking connectors. The cutting rings on the base of the boot provide marks for different cable gauges, ensuring a tight fit around the cord.

These pre-wired junction boxes feature a molded 7-way plug and easily connect to an existing trailer wiring system. Made of impact resistant PVC, these junction boxes are guaranteed to last harsh road conditions. Each kit includes all of the plastic hardware and sealing grommets needed. There are several different cable length options to choose from, making it easy to find the right one.

Limited one year warranty

• WARNING: It is recommended to check with the manufacturer or dealership for vehicle specific information before starting. READ all instructions carefully before attempting to wire a vehicle using these products. Follow the instructions above. Improperly wiring to the trailer/vehicle may cause electrical malfunction or other damage, which could result in property damage, personal injury or even death. Conntek is not responsible for any damages caused by incorrect wiring.