Wiring Devices

This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This 3-prong NEMA L6-30P male assembly plug is rated at 30A and 250V. It is available in a yellow nylon body and includes the compression ring, gasket, and tight screw for easy wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

This NEMA L14-20 assembly / replacement generator plug can be used as a replacement on an existing cord or for wiring on to a new cord needing this configuration style.

Max Grip Cable: OD: 18.5mm.

Approval: UL & C-UL

Limited one year warranty

This assembly plug features a NEMA L14-30, 30A locking configuration and a black nylon body. It is a straight, bladed grab cord type.

Max Grip Cable: OD ø18.5mm

Approval: UL, C-UL

Limited one year warranty

This NEMA L5-20R locking connector can be used to wire on to a new cord or as a replacement for an existing cord. The black nylon body is impact resistant to withstand tough conditions. The gasket, compression ring, and tightening screws are all included.

Max Grip Cable: OD 17.5mm

Limited one year warranty

This 20A female assembly connector is typically used for 20 amp generator cords with the L6-20 configuration. It is constructed of a durable yellow nylon body with a easy to wire design.

Bladed Grab Cord type

Limited one year warranty

This 3-prong locking connector is commonly used with RV, marine, and generator applications. It can be used to replace a connector that has the NEMA L5-30R configuration. The connector is made with a black nylon body that is resistant to impact.

•Hexagonal Cable Clamp

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This 30A 250V NEMA L6-30R locking assembly female connector has a yellow nylon body with rear cord clamp. It includes all the necessary parts for wiring including the gasket, compression ring, and tight screw. The L6-30 configuration is commonly used with in-rack Power Distribution Units (PDUs) and for heavy-duty power equipment such as welders and other industrial equipment.

Max Grip Cable: OD 17.5mm.

UL & C-UL listed

Limited one year warranty

This locking generator connector has the NEMA L14-20R configuration. Use for wiring as a replacement on to an existing cord or for creating a new one that needs this configuration.

Max Grip Cable: OD 16.5mm.

Limited one year warranty

This 30A, L14-30R assembly / replacement connector is commonly used with generators and backup systems.

Max Grip Cable: OD 16.5mm.

Limited one year warranty

This 50A, 250V locking assembly plug has the CS8365 configuration. Use with generators, temp power, industrial settings, or anywhere this configuration style is needed.

Approval: UL, C-UL

Limited one year warranty

This 50A, 250V locking assembly connector uses the CS8364 configuration. It is steel encased with an orange body. Use with generators, temp power, industrial settings, or anywhere this configuration style is needed.

Limited one year warranty

This 50 amp NEMA SS2-50 marine shore power locking assembly plug comes in a heavy duty steel body surrounded by a hardened plastic case. It also has a center hole for connecting to a CS6364 connector that has the center pin. It can be used for wiring on to an existing cord as a replacement or for adding on to a new power cord.

Approval: UL, C-UL

Limited one year warranty

This 50A locking assembly connector comes has a nylon body and is a grab cord type. It is similar to a CS6364 connector, but this connector does not include the center guiding pin. Use as a replacement for RV, boat, generator, or other devices. These connectors are used in many industrial applications as well.

Applicable Cable Types:

Gauge: 6/4 : Jacket types: ST, STW, STOOW, STOW, SOW, SOOW)

Gauge: 6/3 8/1: Jacket types: (ST, STW, STOOW, STOW)

Approval:UL & C-UL

Limited one year warranty