Wiring Devices

This bright yellow weatherproof boot covers the female connector of a power cord that will be exposed to the elements. It is suitable for wiring device systems with a bladed grab cord type and fits most 30A locking connectors. The cutting rings on the base of the boot provide marks for different cable gauges, ensuring a tight fit around the cord.

This pigtail cord features a NEMA 5-15 standard household plug with a locking ground screw to help prevent the cord from accidentally unplugging. The outer jacket is a bright yellow color and has been removed 2 inches on the female end for easy wiring.

Limited one year warranty

This NEMA L14-20 assembly / replacement generator plug can be used as a replacement on an existing cord or for wiring on to a new cord needing this configuration style.

Max Grip Cable: OD: 18.5mm.

Approval: UL & C-UL

Limited one year warranty

This 20A female assembly connector is typically used for 20 amp generator cords with the L6-20 configuration. It is constructed of a durable yellow nylon body with a easy to wire design.

Bladed Grab Cord type

Limited one year warranty

This power cord has a NEMA 5-15 plug with the outer jacket removed on the female side for easily hard wiring to a device or attaching an assembly connector for creating a power cord. The cable has an 8ft. length to provide plenty of room away from the outlet.

Approval: UL, C-UL

Limited one year warranty

This assembly plug features a NEMA L14-30, 30A locking configuration and a black nylon body. It is a straight, bladed grab cord type.

Max Grip Cable: OD ø18.5mm

Approval: UL, C-UL

Limited one year warranty

This 3-prong locking connector is commonly used with RV, marine, and generator applications. It can be used to replace a connector that has the NEMA L5-30R configuration. The connector is made with a black nylon body that is resistant to impact.

•Hexagonal Cable Clamp

Max Grip Cable: OD ø16.5mm

Limited one year warranty

These power cords have an elbow style NEMA 5-15 flat plug and the outer jacket removed on the female side. These cords can be used as replacements for 15A household devices, such as air conditioners, microwaves, refrigerators, and other devices.

Approval: Plug, SPT-3: UL, C-UL

Limited one year warranty

This 30A 250V NEMA L6-30R locking assembly female connector has a yellow nylon body with rear cord clamp. It includes all the necessary parts for wiring including the gasket, compression ring, and tight screw. The L6-30 configuration is commonly used with in-rack Power Distribution Units (PDUs) and for heavy-duty power equipment such as welders and other industrial equipment.

Max Grip Cable: OD 17.5mm.

UL & C-UL listed

Limited one year warranty

This 50A 125V locking assembly plug is steel encased with a yellow body. It has the NEMA SS1-50 configuration that is typically used at older marine shore pedestals.

Limited one year warranty

This small wiring harness features a Green Dot sealed 20amp male end with a removed outer jacket on the female end. It is commonly used for rewiring units with damaged cables or wiring a new unit altogether.

•(15.8mm long exposed copper)

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

This 50A, 250V locking assembly plug has the CS8365 configuration. Use with generators, temp power, industrial settings, or anywhere this configuration style is needed.

Approval: UL, C-UL

Limited one year warranty