Recreational Vehicle Power

This pigtail adapter plugs into a L5-30 inlet, commonly used with boats and RVs, and allows it to receive power from a NEMA 5-15, standard household outlet. It is ideal for charging the battery or prepping for a trip. The female connector has a LED power indicator light that illuminates when the power is connected and a threaded ring that screws around the inlet to create a watertight seal. The cable has a bright yellow outer jacket as well as 10 gauge wire for minimal line loss.

Approval: Plug, connector and STOW: UL, C-UL

Limited one year warranty

This weatherproof boot is designed to work for both 50A male plugs and female connectors to provide protection against the elements.

Limited one year warranty

This 50A threaded ring can be attached to a weatherproof boot as a replacement if one breaks or strips. This ring is made of high impact ABS plastic and fits snugly over the weatherproof boot by using a heat gun or hair dryer to warm it up.

This threaded ring is compatible with most 30A RV and marine inlets. It fits over a weatherproof boot and screws over an inlet to provide maximum protection against the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This sealing collar and threaded ring combo bridge the gap between two 30A power cords to prevent water damage. Another 30A power cord with a weatherproof boot and ring will fit on the other side, keeping the connection safe from the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This 50A locking assembly connector comes has a nylon body and is a grab cord type. It is similar to a CS6364 connector, but this connector does not include the center guiding pin. Use as a replacement for RV, boat, generator, or other devices. These connectors are used in many industrial applications as well.

Applicable Cable Types:

Gauge: 6/4 : Jacket types: ST, STW, STOOW, STOW, SOW, SOOW)

Gauge: 6/3 8/1: Jacket types: (ST, STW, STOOW, STOW)

Approval:UL & C-UL

Limited one year warranty

Need to wire a new trailer or replace an old junction box with a new one? This 7 way junction box comes ready to wire, and includes all plastic, hardware, and sealing grommets you will need.

A 7 Way system provides additional circuits for trailers with electric brakes and auxiliary lighting such as interior lights or a backup/reverse function.

CAUTION: The diagrams are instructions on how to wire a vehicle for towing with these products. Some manufactures use a different wire setup than listed, so it is very important to double check your current wiring for compatibility with this product. We recommend that you use a test light/volt meter to check the wiring before using.

This standard black 7-way trailer cord has a removed outer jacket for custom wiring trailer applications. The cable is abrasion resistant while the plug has easy grip wings for quick removal. It is designed to work with most RV/motor-home applications.

The 7-pole connectors provide additional circuits for trailers with electric brakes and auxiliary lighting such as interior lights or a backup/reverse function.

Limited one year warranty

*Wiring instructions included