Power Cords

This server power cord has a European 3 pin plug (CEE 7/7 European Schuko) and an IEC C19 female connector with a left turn orientation. The cable extends 8.5ft. to provide plenty of space away from the outlet.

Approval: Plug: DEMKO, SEMKO, NEMKO, FIMKO, IMQ, GOST, Connector: VDE, H05VV-F: European
Limited one year warranty

This power cord features a 10A 250V Chinese Type I plug. The Push Lock connector has an IEC C13 configuration and easily disconnects from an inlet by pulling back on the red tabs. At 10ft. long, this cable provides plenty of room away from the outlet.

Approval: Plug & Cable-CCCs

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.

Limited one year warranty

This NEMA L14-20 rubber extension cord has a rubber outer jacket that is oil and chemical resistant as well as being flexible in subzero temperatures. Please note that this cable derates to 15A when over 50ft.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

Power multiple devices from a generator with one of these 20A, L14-20 cords. They split a single 20A, 120/240V outlet into four 15/20A standard household outlets.

Max Power: 5000W

Approval: Plug, Connector, SJTW: UL, C-UL

Limited one year warranty

These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max Power: 5000W

Approval: Plug, STW, UL & C-UL listed

Limited one year warranty

This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This NEMA L14-30 extension cord features a rubber jacket that stays flexible in cold temperatures and provides oil and water resistance. Both the male plug and female connector are fully molded.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty