This server power cord has a European 3 pin plug (CEE 7/7 European Schuko) and an IEC C19 female connector with a left turn orientation. The cable extends 8.5ft. to provide plenty of space away from the outlet.
Approval: Plug: DEMKO, SEMKO, NEMKO, FIMKO, IMQ, GOST, Connector: VDE, H05VV-F: European
Limited one year warranty
This power cord features a 10A 250V Chinese Type I plug. The Push Lock connector has an IEC C13 configuration and easily disconnects from an inlet by pulling back on the red tabs. At 10ft. long, this cable provides plenty of room away from the outlet.
Approval: Plug & Cable-CCCs
Limited one year warranty
This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.
This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.
Limited one year warranty
*Derated to 45 Amps when the cable is longer than 50ft
This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.
Limited one year warranty
This IEC 309 5-pin IP67 power cord has a watertight plug and terminal ends for easy wiring. It is typically used for standard industrial purposes.
Limited one year warranty
This generator extension cord connects to a generator's outlet with a L14-20 configuration. Both the male plug and female connector are fully molded for durability. The bright yellow cable is heat resistant up to 221°F and will remain flexible in cold temperatures.
Max Power: 5000W
Approval: Plug, STW, and Connector: UL, C-UL
Limited one year warranty
*Derated to 15 Amps when the cable is longer than 50ft
This NEMA L14-20 rubber extension cord has a rubber outer jacket that is oil and chemical resistant as well as being flexible in subzero temperatures. Please note that this cable derates to 15A when over 50ft.
Approval: Plug, SJOOW: UL, C-UL
Limited one year warranty
Power multiple devices from a generator with one of these 20A, L14-20 cords. They split a single 20A, 120/240V outlet into four 15/20A standard household outlets.
Max Power: 5000W
Approval: Plug, Connector, SJTW: UL, C-UL
Limited one year warranty
These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.
Max Power: 5000W
Approval: Plug, STW, UL & C-UL listed
Limited one year warranty
This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.
Approval: Plug, Connector, and STW: UL, C-UL
Limited one year warranty
This NEMA L14-30 extension cord features a rubber jacket that stays flexible in cold temperatures and provides oil and water resistance. Both the male plug and female connector are fully molded.
Approval: Plug, SJOOW: UL, C-UL
Limited one year warranty
These 30 amp multi-outlet generator cord features four 15/20A (120V) 5-15/20R outlets. Each outlet has a protective cap to cover the outlets when not in use. It plugs into a generator's L14-30 outlet and provides power for running devices such as a fridge, portable a/c, lights, etc. during a storm.
Max Power: 7500W
Approval: Plug, Connector, and STW/SJTW: UL, C-UL
Limited one year warranty