Pigtail Adapters

Avoid the costly setup of an EV charging station with this EV/Tesla adapter. It converts a NEMA 6-50 outlet that is commonly used for welders to a NEMA 14-50 female connector for plugging in an EV charging system.

This item is for EV USE ONLY, and must not be used with any other power system.

Max Power: 12500W

Limited one year warranty

This pigtail adapter cord converts an IEC 320 C14 plug to NEMA 5-15 connector. The connector has the Snap Pop easy release feature, that disconnects the adapter by simply pressing down on the tab. This adapter can be used for a variety of different purposes, such as to gain a standard household three prong outlet from either a PC power cord or an auxiliary IEC C13 outlet.

Approval: Plug, connector, and SJT: UL, C-UL

Limited One Year Warranty

This adapter cord converts the 50A locking style into the 50A straight blade outlet, commonly used for Tesla charging, temp power, power distribution units, and other purposes.

Limited one year warranty

This 50A adapter plugs into a CS6365 / SS2-50 outlet commonly used with generators and allows devices using a 10-50 plug, such as welders and older appliances, to receive power.

Limited one year warranty

This pigtail adapter has a 3 prong NEMA 10-30 dryer plug, and a NEMA L6-20 female connector, commonly used with EV charging equipment.

This item is for EV USE ONLY, and must not be used with any other power system.

Limited one year warranty

This pigtail adapter has a 4 prong NEMA 14-50 plug, and a NEMA L6-20 female connector, commonly used with EV charging equipment.

This item is for EV USE ONLY, and must not be used with any other power system.

Limited one year warranty

This pigtail adapter has a 3 prong NEMA 5-15 plug with secure locking screw feature, and a NEMA L6-20 female connector, commonly used with EV charging equipment.

This item is for EV USE ONLY, and must not be used with any other power system.

Limited one year warranty

This pigtail adapter has a 3 prong NEMA 5-20 plug, and a NEMA L6-20 female connector, commonly used with EV charging equipment.

This item is for EV USE ONLY, and must not be used with any other power system.

Limited one year warranty

This pigtail adapter has a locking 3 prong NEMA L14-30 plug, and a NEMA L6-20 female connector, commonly used with EV charging equipment.

This item is for EV USE ONLY, and must not be used with any other power system.

Limited one year warranty

This pigtail adapter has a locking 3 prong NEMA L6-30 plug, and a NEMA L6-20 female connector, commonly used with EV charging equipment.

This item is for EV USE ONLY, and must not be used with any other power system.

Limited one year warranty

This adapter has (Ground Fault Circuit Interrupter) protection built in to the plug and a triple outlet connector for allowing up to three devices to be plugged in and protected. It is commonly used at job sites for worker and equipment safety in damp/wet conditions when a GFCI outlet is inaccessible.

Max power: 1875 Watts

Approval: Plug, SJTW, Connector: UL, C-UL

Limited one year warranty

GFCI (Ground Fault Circuit Interrupter) provides personal protection from ground faults and open neutral conditions for the job site, plant floor or workshop. GFCI is UL listed and meets OSHA specifications. When using a GFCI adapter for an outlet that is not protected, the adapter should always be placed nearest the outlet (GFCI then the extension cord).

This GFCI pigtail adapter has a NEMA 5-15 Loc-King plug and connector that can be used with other products in the series. The male plug has a Secure Twist Ring that easily fastens around the connector to keep the cords firmly attached, while the connector includes a protective cap to cover it when not in use. The bright green outer jacket helps this adapter stand out from other power cords.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty