Pigtail Adapters

This adapter connects to all EV chargers with a 14-50 plug and connects to industrial outlets with a L6-30 configuration.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This adapter plugs into a L14-30 outlet, commonly used with generators, and has a SS2-50R connector that connects to most distribution centers, transfer switches, and marine inlets. The female connector features a weatherproof boot and a threaded ring that can securely twist around an inlet to provide maximum protection against the elements. The cable's outer jacket is heat resistant up to 221°F.

Max Power: 7500W

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This generator pigtail adapter cord features an L5-20 assembly plug and molded L14-30 female connector. It splits the single 125V hot wire from the L5-20 connection to provide power to both needed for the L14-30 connection.

Max power: 2500W

Approval: Plug, STW, Connector: UL, C-UL

Limited one year warranty

This generator pigtail adapter cord plugs into a L5-30 outlet commonly found on generators and allows devices with a L14-20 plug to receive power. It splits the single 125V hot wire from the L5-30 to the two hot wires needed for the L14-20 connection.

Approval: Plug, STW, and connector: UL, C-UL

Max Power: 3750W

This adapter cord can convert the L5-30 outlet, commonly found on generators, and allows  50 amp devices with a SS2-50 plug, such as a large RV or boat, to receive power.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This pigtail adapter cord plugs into a NEMA 10-30 outlet, commonly used with older dryers and ranges, and has a NEMA 10-50 receptacle that is commonly used with more powerful household appliances.

Limited one year warranty

This pigtail adapter converts the older non-grounding dryer outlet (10-30) to the newer (14-30) configuration, which has grounding. Please note that this adapter is designed only as a temporary solution until a 14-30 outlet can be installed since there is no grounding with a 10-30 outlet.

This adapter is useful for attaching industrial equipment with a 6-50 plug to a 10-30, 30A outlet. The 10-30 configuration is commonly found in older homes for electric dryers & ranges.

This pigtail adapter plugs into the newer NEMA 14-30 outlet, commonly used with dryers, and allows devices using the older NEMA 10-50 plug to receive power.

Max power: 7500W

Limited one year warranty