Marine Shore Power

This IEC 309 5-pin IP67 power cord has a watertight plug and terminal ends for easy wiring. It is typically used for standard industrial purposes.

Limited one year warranty

This adapter is useful in allowing a device with a L5-30 plug to connect to a L5-20 outlet. Please note there is no cover on the adapter, so it is not recommended that it be used in wet or damp conditions.

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This marine Y-adapter splits a L5-30 outlet to allow two boats with this 30A connection to be plugged in at the same time. All ends are fully molded with threaded rings and include LED power indicator lights. Also included are two sealing collars that bridge the connections between the two L5-30R connectors to help prevent water from leaking into the connection.

Approval: Plug, connector and STOW: UL, C-UL

Limited one year warranty

This marine shore pigtail adapter plugs into the locking 30A L5-30 power source for marine power and converts it to a 15A 5-15 standard household outlet for plugging in a regular extension cord. The male plug includes a threaded ring.

Approval: Plug, connector and STOW: UL, C-UL

Limited one year warranty

This marine shore pigtail adapter plugs into the locking 30A L5-30 power source for marine power and converts it to a 15A 5-15 standard household outlet for plugging in a regular extension cord. The male plug includes a threaded ring and a LED power indicator light.

Approval: Plug, connector and STOW: UL, C-UL

Limited one year warranty

This pigtail adapter connects to a 30 amp marine standard NEMA L5-30 outlet and connects to a boat using the older 50 amp 125V NEMA SS1-50 configuration style.

Approval: Plug and STOW: UL, C-UL

Limited one year warranty

This marine shore pigtail adapter cord has a L5-30P male plug that connects to the standard 30A marine receptacle and allows a larger boat with the newer locking 50A 125/250V SS2-50 connection to receive power.

It splits the single 125V hot wire from the L5-30 outlet for providing power to both wires needed for the SS2-50 connection. Both the male and female ends are fully molded.

Limited one year warranty

This 3-prong locking connector is commonly used with RV, marine, and generator applications. It can be used to replace a connector that has the NEMA L5-30R configuration. The connector is made with a black nylon body that is resistant to impact.

•Hexagonal Cable Clamp

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This 30A assembly combo replaces the L5-30R connector commonly found on RV or marine shore power cords. The weatherproof boot fits over the female assembly connector to create a tight seal, while the threaded ring screws around the inlet to prevent water damage from occurring at the connection. A gasket, compression ring, and tight screw are all included with the

Max Grip Cable: OD ø17.5mm

This pigtail adapter powers a large RV or camper with the SS2-50 configuration when only a standard household 15A receptacle is available. It is useful when preparing for trips at home or to charge the battery before leaving.

The male plug features a locking ground screw that helps prevent the adapter from accidentally unplugging. The female connector features a threaded ring that securely screws around the inlet to help protect it from water damage. It is available in a bright yellow color for easy visibility.

Approval: Plug, STOW: UL, C-UL .

Limited one year warranty

This 50A 125V locking assembly plug is steel encased with a yellow body. It has the NEMA SS1-50 configuration that is typically used at older marine shore pedestals.

Limited one year warranty

This marine shore power Y-adapter has a NEMA SS1-50 plug for connecting to older marine pedestals and splits that connection into two NEMA L5-30 outlets. The middle box features a LED power indicator light for easily testing for power.

Approval: Plug, connector and STOW: UL, C-UL

Limited one year warranty

This marine shore pigtail adapter allows a boat with a NEMA L5-30 connection to receive power from a marine shore pedestal with the older NEMA SS1-50 configuration.  Both ends are fully molded and include threaded rings to help protect the connection against water damage. The female connector also features a built-in LED light that illuminates when the power is connected.

Approval: Connector and STOW: UL, C-UL

Limited one year warranty

This 50A marine shore pigtail adapter powers a boat with a 125/250V, NEMA SS2-50 connection to receive power from the older marine shore pedestals that have the 125V, NEMA SS1-50 configuration.

Both the male plug and female connector are fully molded and feature threaded rings to protect the connection from water damage.

Limited one year warranty