Marine Shore Power

These 30A L5-30 power cords feature a yellow jacket that is covered with abrasion resistant orange braided PVC to extend the life of the cable. Both the plug and connector feature LED power indicator lights as well as threaded rings to ensure a watertight connection. The female connector also has a protective cap that covers it when not in use.

Approval: Plug, STOW, and connector: UL, C-UL

Limited one year warranty

These IEC 309 IP 44 splash-proof plugs come in several different options to choose from. Each one comes in a white body housing with either a yellow or blue collar around the plug.

Limited one year warranty

This sealing collar and threaded ring combo bridge the gap between two 30A power cords to prevent water damage. Another 30A power cord with a weatherproof boot and ring will fit on the other side, keeping the connection safe from the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This threaded ring is compatible with most 30A RV and marine inlets. It fits over a weatherproof boot and screws over an inlet to provide maximum protection against the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This weatherproof boot is designed to work for both 50A male plugs and female connectors to provide protection against the elements.

Limited one year warranty

This marine shore power adapter features a 45 degree angled connector to provide strain relief at the inlet. This adapter also helps extend the life of the heavy marine shore or RV power cords by not putting an undue burden on the cable if connected with a straight connector.

Limited one year warranty

These 50 amp marine cords are made to connect from a shore power pedestal to a boat's 50A inlet. They are available in a variety of lengths up to 100ft. Each cord includes threaded rings and weatherproof boots that protect the plugs and connectors from water damage.

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty

*Assembly Plug & Connector

**Derated to 45 Amps when the cable is longer than 50FT

These 50 amp marine cords are made to connect from a shore power pedestal to a boat's 50A inlet. They are available in a variety of lengths up to 100ft. Each cord includes threaded rings and weatherproof boots that protect the molded plug and connector from water damage.

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty

These marine shore power cords have the older 50A 125V SS1-50 configuration. Both the male plug and female connector are surrounded by weatherproof boots that include threaded rings to help create a watertight seal at the connection.

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50FT