Conntek

This marine shore power pigtail adapter connects to the standard SS2-50 connection found on most marine pedestals and enables a smaller boat or other device needing a NEMA L5-30 connection to receive power. The female connector features a built-in LED power indicator for easily testing  power.

Approval: Connector and STOW: UL, C-UL

Limited One Year Warranty

This 50A Y-adapter has a NEMA SS2-50P/CS6365 male plug and splits the connection into two SS2-50 outlets for powering two boats off the same connection. All ends include a threaded ring that screw around an inlet or collar to protect the connections from water damage.

Two LED indicator lights on the unit illuminate when the power is connected.

Limited one year warranty

This marine shore Y-adapter connects to the standard marine shore SS2-50 (125/250V) connection and splits it into two SS1-50 (125V) outlets, allowing two boats with that older style to receive power.

The male plug and female connectors are fully molded to provide maximum protection against the elements.

The middle box also has two LED power indicator lights that illuminate when the power is connected for easily testing power.

Limited one year warranty

This marine shore Y-adapter features a SS2-50 plug and splits the connection into two L5-30 outlets, for two boats to be powered by the same power source. The L5-30 female connectors feature LED power indicator lights and threaded rings that screw around the power cords to create a secure connection.

Approval: Connector and STOW: UL, C-UL

Limited one year warranty

This 50 amp NEMA SS2-50 marine shore power locking assembly plug comes in a heavy duty steel body surrounded by a hardened plastic case. It also has a center hole for connecting to a CS6364 connector that has the center pin. It can be used for wiring on to an existing cord as a replacement or for adding on to a new power cord.

Approval: UL, C-UL

Limited one year warranty

This NEMA SS1-50R assembly connector can be used for wiring a new cord or as a replacement for an existing power cord. The SS1-50 configuration is typically found at marine docks with older 125V pedestals.

Limited one year warranty

This 50A marine shore pigtail adapter powers a boat with a 125/250V, NEMA SS2-50 connection to receive power from the older marine shore pedestals that have the 125V, NEMA SS1-50 configuration.

Both the male plug and female connector are fully molded and feature threaded rings to protect the connection from water damage.

Limited one year warranty

This marine shore pigtail adapter allows a boat with a NEMA L5-30 connection to receive power from a marine shore pedestal with the older NEMA SS1-50 configuration.  Both ends are fully molded and include threaded rings to help protect the connection against water damage. The female connector also features a built-in LED light that illuminates when the power is connected.

Approval: Connector and STOW: UL, C-UL

Limited one year warranty

This marine shore power Y-adapter has a NEMA SS1-50 plug for connecting to older marine pedestals and splits that connection into two NEMA L5-30 outlets. The middle box features a LED power indicator light for easily testing for power.

Approval: Plug, connector and STOW: UL, C-UL

Limited one year warranty

This 50A 125V locking assembly plug is steel encased with a yellow body. It has the NEMA SS1-50 configuration that is typically used at older marine shore pedestals.

Limited one year warranty

This power strip features four Sheet F outlets with a C14 inlet. It is designed for use in server rooms and businesses, as it can easily be mounted to a server station or wall vertically with the attached mounting tab. The top of the power strip features a bright orange On/Off switch while the side has a mounted 10A circuit breaker. The unit is made with ABS temperature resistant material for extra heat resistance.

Approval: UL, C-UL, TUV

Limited one-year warranty

This 30A pigtail cord has a NEMA L5-30 female connector is angled downward at a 45° angle for strain relief. It also has a built-in LED power indicator light and a threaded ring that screws around the inlet. The supply end has the outer jacket removed by 40mm for easily wiring an assembly plug. This pigtail adapter is designed for RV power applications.

Approval: Connector, STW: UL, C-UL

Limited one year warranty