Conntek

This NEMA L5-30 flush mount receptacle has a black nylon face and is back wired. Install for home usage, industrial settings, or anywhere this configuration style is needed.

Approval: UL, C-UL

Limited one year warranty

This 30A assembly combo replaces the L5-30R connector commonly found on RV or marine shore power cords. The weatherproof boot fits over the female assembly connector to create a tight seal, while the threaded ring screws around the inlet to prevent water damage from occurring at the connection. A gasket, compression ring, and tight screw are all included with the

Max Grip Cable: OD ø17.5mm

This 3-prong locking connector is commonly used with RV, marine, and generator applications. It can be used to replace a connector that has the NEMA L5-30R configuration. The connector is made with a black nylon body that is resistant to impact.

•Hexagonal Cable Clamp

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This locking 30A assembly connector comes in a black nylon body and features a 45 degree downward angle for strain relief. A threaded ring is included that securely fits around the inlet to create a watertight seal, helping to protect the connection from water damage.

Limited one year warranty

This plug adapter is commonly used to convert the 30A 125V locking outlet on a generator to the RV standard straight blade 30A outlet.

Limited one year warranty

This adapter is typically used to convert a 30A locking outlet commonly found on generators into the RV standard 30A straight blade style. Both the L5-30P male plug and TT-30R female connector are fully molded. The female connector has grip wings for better leverage while unplugging the adapter.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This adapter is typically used to convert a 30A locking outlet commonly found on generators into the RV standard 30A straight blade style. Both the L5-30P male plug and TT-30R female connector are fully molded. The female connector comes with an easy grip handle with a LED power indicator light for better leverage while unplugging the adapter.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This marine shore pigtail adapter cord has a L5-30P male plug that connects to the standard 30A marine receptacle and allows a larger boat with the newer locking 50A 125/250V SS2-50 connection to receive power.

It splits the single 125V hot wire from the L5-30 outlet for providing power to both wires needed for the SS2-50 connection. Both the male and female ends are fully molded.

Limited one year warranty

This adapter cord can convert the L5-30 outlet, commonly found on generators, and allows  50 amp devices with a SS2-50 plug, such as a large RV or boat, to receive power.

Approval: Plug, STW: UL, C-UL

Limited one year warranty