Conntek

This generator Y adapter splits a L5-30 outlet into two L5-20 connectors for plugging two devices in at the same time. All ends on the Y-adapter are fully molded.

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty

This generator adapter splits a L5-30 outlet into two standard household 5-15/20R receptacles. Both the male plug and the female connectors are fully molded, and the connectors have built-in neon lights that illuminate when the power is connected.

Maximum Wattage: 3750W

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty

These 30A extension cords have a rubber outer jacket that remains flexible even in cold temperatures. The L5-30 connection is commonly used with in-rack power distribution units as well as medium to large portable generators, making these cords ideal for industrial equipment or large power tools. This configuration is also used with 30A RV and marine shore power.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

This NEMA L5-20R locking connector can be used to wire on to a new cord or as a replacement for an existing cord. The black nylon body is impact resistant to withstand tough conditions. The gasket, compression ring, and tightening screws are all included.

Max Grip Cable: OD 17.5mm

Limited one year warranty

This pigtail adapter plugs into a NEMA L5-20 outlet, commonly found on generators, and has a TT-30 connector for plugging in a RV standard 30A plug or other device. The female connector has a flat design with grip wings for easier unplugging.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This pigtail adapter plugs into a NEMA L5-20 outlet, commonly found on generators, and has a TT-30 connector for plugging in a RV standard 30A plug or other device. The female connector is available with an easy grip handle and LED power indicator light for easier unplugging.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This locking power cord features a molded L5-20P plug. The equipment end has the removed outer jacket for easy hard wiring or attaching an assembly connector for a custom cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

This adapter is useful in allowing a device with a L5-30 plug to connect to a L5-20 outlet. Please note there is no cover on the adapter, so it is not recommended that it be used in wet or damp conditions.

Limited one year warranty

This generator pigtail adapter cord features an L5-20 assembly plug and molded L14-30 female connector. It splits the single 125V hot wire from the L5-20 connection to provide power to both needed for the L14-30 connection.

Max power: 2500W

Approval: Plug, STW, Connector: UL, C-UL

Limited one year warranty

This plug adapter converts a NEMA L5-20 outlet, commonly found on generators, into the straight blade style, NEMA 5-20 configuration, that can be used with kitchen appliances, power equipment, and other high powered devices.

*This plug adapter does not have the T-Slot design for accepting a NEMA 5-15 standard household plug; it will only accept NEMA 5-20 plugs.

Limited one year warranty

This adapter cord features a NEMA L5-20 plug and has a connector with a NEMA 5-15/20 configuration. It makes a great addition to a generator backup system to power a 3 prong standard household item from a generator's locking style 20A NEMA L5-20 outlet.

Approval: Plug, Connector, and SJT: UL, C-UL

Limited one year warranty