Conntek

This power extension cord features a NEMA 5-15 molded elbow plug with a 90° downward angle. The female end has a NEMA 5-15/20 connector that accepts both NEMA 5-15P and NEMA 5-20P plugs.

Limited one year warranty

This hospital grade power strip has a metal enclosure that is impact, corrosion, and rust resistant while also having protection from fire damage. It features four 5-15 outlets for connecting multiple devices. The power strip also has 15A resettable overcurrent protection that automatically shuts the power off when the current exceeds the rating passed through the device or if it encounters a fault. Simply push the reset button after fixing the problem and it can be used again as before. The strain relief bushing prevents against cable displacement.

• •Coiled cable has a working length of about 9ft
• •Male plug is Green Dot sealed.

Approval: Meets UL1363A

Limited one year warranty

This power cord has a molded NEMA L21-20 plug and three outlet boxes evenly spaced throughout the cord. Each outlet box has four NEMA 5-15/20 standard three prong household receptacles.

•Twelve total NEMA 5-15/20 receptacles

Limited one year warranty

This 30A assembly combo replaces the L5-30R connector commonly found on RV or marine shore power cords. The weatherproof boot fits over the female assembly connector to create a tight seal, while the threaded ring screws around the inlet to prevent water damage from occurring at the connection. A gasket, compression ring, and tight screw are all included with the

Max Grip Cable: OD ø17.5mm

This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.

Approval: UL & C-UL Listed

Limited one year warranty

This 30A assembly straight plug is designed for RVs and generators using this configuration. It has a standard inline design and is built with impact resistant nylon to withstand years of usage. The gasket, compression ring, and tight screw are all included.

Max Grip Cable: OD: 18.5mm

Limited one year warranty

This 30A TT-30R straight blade assembly/replacement connector can be attached to power cords that are commonly used with generators and RVs. It features a black nylon body and is a bladed grab cord type. The straight connector design allows it to connect directly to an inlet or other power cord.

Max Grip Cable: OD ø18.5mm

Limited one year warranty

This straight blade NEMA 14-50P assembly/replacement plug has a nylon body and is a grab cord type. It can be used to create or rewire a RV, generator, range, or other power cord that would use this configuration.

Limited one year warranty

This 50A, 14-50 assembly connector can be used to wire a new cord or rewire an existing cord with the same configuration. It is a straight bladed, grab cord type with a black nylon body. The 14-50 configuration is commonly used with RVs, generators, electric vehicles, and industrial usage.

Limited one year warranty

This Green Dot heavy duty hospital grade coiled cord extends a 15A outlet to a working length of up to 15ft when extended. The female connector allows both a 15 or 20 amp plug to receive power. Attach the metal hook on the plug to the wall to prevent the cord from unplugging while the cable is extending. While designed for hospital use, this cord can also be used for other applications, including commercial settings.

Approval: Plug, SJT, and Connector: UL, C-UL

Limited one year warranty

This power cord features a NEMA 7-20 plug and a removed outer jacket that allows this cord to be hard wired into devices, such as Packaged Terminal Air Conditioner (PTAC) units, or for adding an assembly female connector to create a power cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

These 15A flanged inlets (NEMA 5-15P) feature a nylon casing and a weatherproof cap to protect the inlet when not being used. Easily wire a connection for RVs, boats, or equipment such as block heaters.

Approval: UL, C-UL

Limited one year warranty