Conntek

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of a home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a SS2-50 (CS6365) male configuration for large systems.

We offer several different finishes of inlet boxes that are all corrosion resistant powder coated steel.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•A sealing collar for power cords that have a threaded ring to create a weather protected seal while in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 12,500W

Approval: Inlet: UL, C-UL

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of a home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a SS2-50 (CS6365) male configuration for large systems.

We offer several different finishes of inlet boxes that are all corrosion resistant powder coated steel.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•A sealing collar for power cords that have a threaded ring to create a weather protected seal while in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 12,500W

Approval: Cordset & Inlet: UL, C-UL

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

Connect power from your portable generator to a transfer switch easily with this NEMA TT-30 power inlet box. Power inlet boxes are ideal for running power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. The box is mounted outside the home / business, and wires directly to a transfer switch / box. When you need emergency power, just connect your generator cord to the inlet box and flip the switch to the transfer unit.

Cordset Features:

•The threaded ring on the L5-30 connector side is designed to securely screw around the power inlet box to form a weather-tight connection when connected.

•The power cord features a flexible weather resistant jacket to prevent damage when used over an extended period of time.

•Features a NEMA TT-30 plug, is the 30 amp RV standard plug that is also commonly found on generators.

• LED power indicators on both the plug and connector ends

•Both ends feature a molded plug and connector to waterproof the cord set.

Inlet Box Features:

•Each inlet box features a protective cap that creates a weather-tight seal when not in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 3750W

Approval: Cordset & Inlet: UL, C-UL

Limited one year warranty

Connect power from your portable generator to a transfer switch easily with this NEMA 14-50 power inlet box. Power inlet boxes are ideal for running power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. The box is mounted outside the home / business, and wires directly to a transfer switch / box. When you need emergency power, just connect your generator cord to the inlet box and flip the switch to the transfer unit.

Cordset Features:

•The threaded ring on the 14-50 connector side is designed to securely screw around the power inlet box to form a weather-tight connection when connected.

•The power cord features a heavy duty jacket to prevent damage when used over an extended period of time.

•Features a  NEMA 14-50 connection, which is also commonly used for EV charging and some 50 amp RVs.

• LED power indicators on the plug

Inlet Box Features:

•Each inlet box features a protective cap that creates a weather-tight seal when not in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 12,500W

Approval: Cordset & Inlet: UL, C-UL

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty