Conntek

These heavy-duty power supply cord plugs into a NEMA 14-30 (125/250V) outlet and have a CS6364 connector for attaching to an inlet box, generator cord, or other device with a CS6365 configuration. It is commonly used with heavy equipment, generators, and power distribution centers. The rubber outer jacket remains flexible in cold temperatures while also providing resistance to oil and water.

Max Power: 7500W

Approval: Jacket STW, Connector: UL, C-UL

Limited one year warranty

This NEMA 10-30 power extension cord is available in several different lengths. This outlet style is used with older dryers and EV chargers.

Limited one year warranty

This laptop power cable connects directly to a laptop's AC adapter that accepts the IEC C5 connection. The 1ft. cable helps prevent tangling issues that occur with longer cords and provides a more convenient option when being very close to an outlet. Both the male plug and female connector feature Snap Pop Easy Release Tabs that disconnect the adapter by pressing downward on the tab.

Approval: SVT:UL,C-UL

Limited one year warranty

These heavy-duty power supply cord plugs into a NEMA 14-30 (125/250V) outlet and have a CS6364 connector for attaching to an inlet box, generator cord, or other device with a CS6365 configuration. It is commonly used with heavy equipment, generators, and power distribution centers.

Max Power: 7500W

Approval: Jacket STW, Connector: UL, C-UL

Limited one year warranty

This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max Power: 5000W

Approval: Plug, STW, UL & C-UL listed

Limited one year warranty

This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.

Max power: 7500W

*De-rated to 25 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This laptop travel adapter kit has a three prong IEC C6 to IEC C5 power cord that commonly fits into a laptop's charger brick. A 3 prong to 2 prong (IEC C6 to IEC C7) plug adapter is also included for two prong laptop charging bricks. The included plug adapters allow this to be used in Australia, Europe, United Kingdom, and United States. This is a must have adapter kit for the frequent traveler.

Limited one year warranty