Conntek

This marine shore pigtail adapter cord has a L5-30P male plug that connects to the standard 30A marine receptacle and allows a larger boat with the newer locking 50A 125/250V SS2-50 connection to receive power.

It splits the single 125V hot wire from the L5-30 outlet for providing power to both wires needed for the SS2-50 connection. Both the male and female ends are fully molded.

Limited one year warranty

This marine shore pigtail adapter allows a boat with a NEMA L5-30 connection to receive power from a marine shore pedestal with the older NEMA SS1-50 configuration.  Both ends are fully molded and include threaded rings to help protect the connection against water damage. The female connector also features a built-in LED light that illuminates when the power is connected.

Approval: Connector and STOW: UL, C-UL

Limited one year warranty

This 50A marine shore pigtail adapter powers a boat with a 125/250V, NEMA SS2-50 connection to receive power from the older marine shore pedestals that have the 125V, NEMA SS1-50 configuration.

Both the male plug and female connector are fully molded and feature threaded rings to protect the connection from water damage.

Limited one year warranty

This marine shore power pigtail adapter connects to the standard SS2-50 connection found on most marine pedestals and enables a smaller boat or other device needing a NEMA L5-30 connection to receive power. The female connector features a built-in LED power indicator for easily testing  power.

Approval: Connector and STOW: UL, C-UL

Limited One Year Warranty

This marine shore Y-adapter connects to the standard marine shore SS2-50 (125/250V) connection and splits it into two SS1-50 (125V) outlets, allowing two boats with that older style to receive power.

The male plug and female connectors are fully molded to provide maximum protection against the elements.

The middle box also has two LED power indicator lights that illuminate when the power is connected for easily testing power.

Limited one year warranty

This 50A Y-adapter has a NEMA SS2-50P/CS6365 male plug and splits the connection into two SS2-50 outlets for powering two boats off the same connection. All ends include a threaded ring that screw around an inlet or collar to protect the connections from water damage.

Two LED indicator lights on the unit illuminate when the power is connected.

Limited one year warranty

This weatherproof boot is designed to work for both 50A male plugs and female connectors to provide protection against the elements.

Limited one year warranty

This 50A threaded ring can be attached to a weatherproof boot as a replacement if one breaks or strips. This ring is made of high impact ABS plastic and fits snugly over the weatherproof boot by using a heat gun or hair dryer to warm it up.

This threaded ring is compatible with most 30A RV and marine inlets. It fits over a weatherproof boot and screws over an inlet to provide maximum protection against the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.