Home & Office Adapters

This pigtail adapter has a NEMA 14-50 plug with a 45° downward angle for strain relief. The NEMA 6-15/20 connector is rated at 250V and is used with high powered devices such as air conditioners, EV chargers, or pool pumps.

Limited one year warranty

This outlet extender cord also features a 5-15 outlet on the backside of the plug to allow another device to "piggyback" off the connection. The cord plugs in at a 45° angle to not block the outlet directly below it.

Approval: UL,C-UL

Limited one year warranty

CAUTION: Keep away from water Do not use when wet. Keep away from children Keep children and pets away from adapter. Avoid overheating, Do not cover adapter with any material. Do not drive, drag, or place objects over the adapter.

This NEMA 14-30 Y-adapter splits the outlet commonly used for newer dryers. Two 14-30 female connectors enable two devices to be plugged in at the same time from the outlet.

Max Power: 7500W

Approval: Plug, Connector, and STW 10/4 600V Heavy Duty Cable: UL, C-UL

Limited one year warranty

This Y-adapter has a 50A straight blade NEMA 14-50 plug for plugging into a portable generator, outlet at a RV campground, EV charging station, and some industrial type outlets. It splits that connection into two NEMA 14-30 outlets, which are common in newer homes for dryers and ranges rated for 30A.

Approval: Plug, Connector, and Cable: UL, C-UL

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty