Generator Power

This adapter allows larger RVs needing a 50 amp connection to receive power when only 30A service is available. The adapter comes with both the plug and connector having easy grip handles with built-in LED power indicator lights.

Max power: 3750W

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This adapter plugs into a NEMA TT-30 outlet commonly found at RV parks and on generators and allows up to three devices using a 5-15 plug to be connected at the same time. The male plug features an easy grip design that has a built-in LED power indicator light. The fan style tri-outlet female connector is clear blue and has a built-in indicator light that illuminates when the power is connected.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty 

This 30A assembly straight plug is designed for RVs and generators using this configuration. It has a standard inline design and is built with impact resistant nylon to withstand years of usage. The gasket, compression ring, and tight screw are all included.

Max Grip Cable: OD: 18.5mm

Limited one year warranty

This 30A Y-adapter splits a single straight blade TT-30 connection, commonly found on generators and at RV parks, into two straight blade 5-15/20 outlets. The male plug features an easy grip handle with a built-in LED power indicator light. Both female ends have an orange neon light that glow when plugged in.

Max power: 3750W

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This 50A locking assembly connector comes has a nylon body and is a grab cord type. It is similar to a CS6364 connector, but this connector does not include the center guiding pin. Use as a replacement for RV, boat, generator, or other devices. These connectors are used in many industrial applications as well.

Applicable Cable Types:

Gauge: 6/4 : Jacket types: ST, STW, STOOW, STOW, SOW, SOOW)

Gauge: 6/3 8/1: Jacket types: (ST, STW, STOOW, STOW)

Approval:UL & C-UL

Limited one year warranty

This 50A locking assembly connector comes in a black nylon body and features a 45 degree downward angle for strain relief. A threaded ring is included that securely fits around the inlet to create a watertight seal, helping to protect the connection from water damage.

Limited one year warranty

This adapter converts a CS6364 outlet that is commonly found on large generators or used with marine shore power to a 6-50 outlet that is commonly used for large welders.

Max Power: 12500W

This 50 amp NEMA SS2-50 marine shore power locking assembly plug comes in a heavy duty steel body surrounded by a hardened plastic case. It also has a center hole for connecting to a CS6364 connector that has the center pin. It can be used for wiring on to an existing cord as a replacement or for adding on to a new power cord.

Approval: UL, C-UL

Limited one year warranty

This 30A straight blade configuration style is commonly found on power cords for generators and is the standard for 30A service at RV parks. The assembly plug features a clamp grip for easy wiring, while the right angle provides strain relief to the cord, allowing the RV pedestal to fully close.

Limited one year warranty

This pigtail adapter powers a large RV or camper with the SS2-50 configuration when only a standard household 15A receptacle is available. It is useful when preparing for trips at home or to charge the battery before leaving.

The male plug features a locking ground screw that helps prevent the adapter from accidentally unplugging. The female connector features a threaded ring that securely screws around the inlet to help protect it from water damage. It is available in a bright yellow color for easy visibility.

Approval: Plug, STOW: UL, C-UL .

Limited one year warranty

This Y-adapter allows two devices using a L6-30 connection to be plugged in one outlet. This configuration is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, as well as many electrical vehicle chargers. The outer jacket on the Y-adapter remains flexible in cold weather and provides heat resistance.

Max Power: 7500W

Approval: Plug, Connector, and STW 10/3 600V Heavy Duty Cable: UL, C-UL

Limited one year warranty

This Y-adapter splits a NEMA L6-30 outlet, commonly used EV chargers and welders, to two NEMA L6-20 connectors. The 3ft. of cable provide plenty of flexibility around the outlet when working with equipment. The NEMA L6-20 configuration is commonly found on in-rack power distribution units as well as with heavy-duty 250V equipment, such as welders.

Limited one year warranty

This 20A female assembly connector is typically used for 20 amp generator cords with the L6-20 configuration. It is constructed of a durable yellow nylon body with a easy to wire design.

Bladed Grab Cord type

Limited one year warranty

This pigtail adapter is commonly used for generators or in industrial settings. It has a male L6-20P plug and a female L6-30R connector that are fully molded.

Approval: Plug, Connector, and SJTOW: UL, C-UL

Limited one year warranty

This Y-adapter splits a NEMA L6-20 connection, allowing up to two devices with that configuration to be plugged in at the same time. The 3ft. of cable provide plenty of flexibility around the outlet when working with equipment. The NEMA L6-20 configuration is commonly found on in-rack power distribution units as well as with heavy-duty 250V equipment, such as welders.

Limited one year warranty