Generator Power

This adapter is useful in allowing a device with a L5-30 plug to connect to a L5-20 outlet. Please note there is no cover on the adapter, so it is not recommended that it be used in wet or damp conditions.

Limited one year warranty

This plug adapter converts a L5-30 outlet into a L5-20 outlet, allowing devices with that plug configuration to receive power. Since this adapter is not waterproof, it is not recommended to use in wet/damp locations.

Limited one year warranty

This power cord has a molded NEMA L21-20 plug and three outlet boxes evenly spaced throughout the cord. Each outlet box has four NEMA 5-15/20 standard three prong household receptacles.

•Twelve total NEMA 5-15/20 receptacles

Limited one year warranty

This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.

Approval: UL & C-UL Listed

Limited one year warranty

This 30A assembly straight plug is designed for RVs and generators using this configuration. It has a standard inline design and is built with impact resistant nylon to withstand years of usage. The gasket, compression ring, and tight screw are all included.

Max Grip Cable: OD: 18.5mm

Limited one year warranty

This 30A TT-30R straight blade assembly/replacement connector can be attached to power cords that are commonly used with generators and RVs. It features a black nylon body and is a bladed grab cord type. The straight connector design allows it to connect directly to an inlet or other power cord.

Max Grip Cable: OD ø18.5mm

Limited one year warranty

This straight blade NEMA 14-50P assembly/replacement plug has a nylon body and is a grab cord type. It can be used to create or rewire a RV, generator, range, or other power cord that would use this configuration.

Limited one year warranty

This 50A, 14-50 assembly connector can be used to wire a new cord or rewire an existing cord with the same configuration. It is a straight bladed, grab cord type with a black nylon body. The 14-50 configuration is commonly used with RVs, generators, electric vehicles, and industrial usage.

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L5-30 male configuration for small to midsize systems.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 3750W

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home / business, and run the wiring to a transfer switch / box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L14-30 male configuration rated for 30 amps, 125/250V.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 7500W

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of a home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a SS2-50 (CS6365) male configuration for large systems.

We offer several different finishes of inlet boxes that are all corrosion resistant powder coated steel.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•A sealing collar for power cords that have a threaded ring to create a weather protected seal while in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 12,500W

Approval: Cordset & Inlet: UL, C-UL

Limited one year warranty

This 50A NEMA 14-50 assembly replacement plug is constructed of a durable black nylon body and comes in a 45° downward angle for strain relief. It is designed for use with STW 6/3 8/1 cable as well as STW 6/4 cable.

Limited one year warranty