These 30 amp multi-outlet generator cord features four 15/20A (120V) 5-15/20R outlets. Each outlet has a protective cap to cover the outlets when not in use. It plugs into a generator's L14-30 outlet and provides power for running devices such as a fridge, portable a/c, lights, etc. during a storm.
Max Power: 7500W
Approval: Plug, Connector, and STW/SJTW: UL, C-UL
Limited one year warranty
These power cords have an elbow style NEMA 5-15 flat plug and the outer jacket removed on the female side. These cords can be used as replacements for 15A household devices, such as air conditioners, microwaves, refrigerators, and other devices.
Approval: Plug, SPT-3: UL, C-UL
Limited one year warranty
This plug adapter converts a straight blade 20A 125V NEMA 5-20 outlet to the locking style 20A 125V NEMA L5-20, commonly used with generators.
Approval: UL, C-UL
Limited one year warranty
This small plug adapter allows a cord with a NEMA 5-20 plug to receive power from a standard 5-15 outlet commonly found at homes and on generator panels.
Limited one year warranty
This NEMA 5-15P, 15A assembly/replacement plug can easily be wired for many different devices such as fans, heaters, and radios that use this configuration.
Max Grip Cable: OD ø9.3mm
Limited one year warranty
This 20A NEMA 5-20 straight blade assembly plug comes in an impact resistant black nylon casing. This configuration is commonly used with refrigerators, microwaves, kitchen appliances, and for some EV charging equipment.
Max grip cable: OD ø9.3mm.
Approval: UL, C-UL
Limited one year warranty
This NEMA 5-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 5-15P or NEMA 5-20P male plug to connect to it.
Max Grip Cable: OD ø9.3mm
Limited one year warranty
This NEMA 6-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 6-15P or NEMA 6-20P male plug to connect to it.
•Straight bladed grab cord type
•Max grip Cable: OD ø9.3mm
Limited one year warranty
This 20A 125V NEMA L5-20 assembly plug is commonly used to wire an existing or new cord for a generator or other device using this configuration. It is constructed of an impact resistant nylon body and includes a gasket, compression ring, and tight screw.
Max grip Cable: OD ø17.5mm
Approval: UL, C-UL
Limited one year warranty