Generator Power

This 30A pigtail adapter converts a TT-30 outlet, commonly found at RV parks and on generators, and allows a device with a L14-30 plug to receive power. It is ideal for powering a backup system with a L14-30 inlet box when only a TT-30 outlet is available on the generator. This adapter splits the single 125V hot wire from the TT-30 outlet to the two needed for the L14-30 connection.

Max Power: 3750W

Approval: STW, Connector: UL, C-UL

Limited one year warranty

This NEMA 5-15 extension cord features a rubber outer jacket that remains flexible in colder temperatures. It is available in 25ft. and 50ft. lengths to provide plenty of room away from the outlet.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

This power extension cord features a NEMA 5-20P male plug and a NEMA 5-15/20R female connector. The male side of this cable plugs into the straight blade 20A outlets typically found in garages, industrial areas, kitchens, and on generators. The rubber cable is designed to remain flexible in cold temperatures during outdoor usage.

Max Wattage: 2500W

Limited one year warranty

These industrial grade power strips are designed to add four NEMA 15/20A outlets from a NEMA 14-30 receptacle. The synthetic rubber cable is suitable for harsh environments where power is needed, such as a warehouse, garage, and construction site. The outlet boxes are sealed to keep water from penetrating them.

Max Power: 7500W

Limited one year warranty

This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max Power: 5000W

Approval: Plug, STW, UL & C-UL listed

Limited one year warranty

This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.

Max power: 7500W

*De-rated to 25 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This pigtail adapter can power up to three 15A devices with a standard 15A household plug from a locking 20A outlet typically found on a generator.

Approval: Plug, Connector, STW: UL, C-UL

Limited one year warranty