Generator Power Cords

These power cords have an elbow style NEMA 5-15 flat plug and the outer jacket removed on the female side. These cords can be used as replacements for 15A household devices, such as air conditioners, microwaves, refrigerators, and other devices.

Approval: Plug, SPT-3: UL, C-UL

Limited one year warranty

This 12V DC extension cable includes a built-in 10A fuse and extends an automobile's, boat's, or generator's charging port up to 10ft for powering devices. The female connector includes a watertight cap that protects it when not in use.

This 12V car charger extension cord has a coiled cable that has a working length of up to 6ft. The plug has a built-in 10A fuse and strain relief protection while the connector has a watertight cap to keep it protected when not in use.

Limited one year warranty

This adapter cable has a NEMA TT-30 flat plug and a NEMA L5-30 connector. This adapter has a 4ft. long cable to provide a little extra length than a standard pigtail adapter.

Limited one year warranty

This 50A RV/generator power cord can power large RVs that have the 50A locking style inlet, SS2-50. The male plug has a flat design that does not obstruct the RV pedestal cover from closing, while the female connector is the standard inline design.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This temporary generator power cord is solidly built with an attractive black finish. It features a NEMA 14-50 plug and a CS6364 connector with a guiding pin for use with most high-power generator and power distribution units (PDU). The cable provides heat resistance up to 221°F.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

*Derated to 45 amps when the cable is longer than 50FT