Extension Cords

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated For: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

This C14 to C15 high temperature power cord is commonly used with kitchen appliances such as electric kettles. The male end will fit a C13 connector, but the cable has a higher temperature rating of 221°F instead of the standard 158°F for a C13 connection.

Approval: UL, C-UL

Limited one year warranty

This C20 to C19 power cord is commonly used to connect servers to Power Distribution Units (PDUs). The C20 inlet is straight while the C19 connector has a 90° downward angle.

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

This NEMA L14-20 rubber extension cord has a rubber outer jacket that is oil and chemical resistant as well as being flexible in subzero temperatures. Please note that this cable derates to 15A when over 50ft.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This NEMA L14-30 extension cord features a rubber jacket that stays flexible in cold temperatures and provides oil and water resistance. Both the male plug and female connector are fully molded.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

These 30 amp multi-outlet generator cord features four 15/20A (120V) 5-15/20R outlets. Each outlet has a protective cap to cover the outlets when not in use. It plugs into a generator's L14-30 outlet and provides power for running devices such as a fridge, portable a/c, lights, etc. during a storm.

Max Power: 7500W

Approval: Plug, Connector, and STW/SJTW: UL, C-UL

Limited one year warranty

These NEMA L15-20 generator extension cords have 4 prongs and are rated at 250V. Each cord comes in a bright yellow jacket for easy visibility.

Approval: Plug, Connector, and SJTW: UL, C-UL

Limited one year warranty