Contractor Power

These 30 amp multi-outlet generator cord features four 15/20A (120V) 5-15/20R outlets. Each outlet has a protective cap to cover the outlets when not in use.

It plugs into a generator's L14-30 outlet and provides power for running devices such as a fridge, portable a/c, lights, etc. during a storm.

Max Power: 7500W

Approval: Plug, Connector, and STW/SJTW: UL, C-UL

Limited one year warranty

This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

These power cords have an elbow style NEMA 5-15 flat plug and the outer jacket removed on the female side. These cords can be used as replacements for 15A household devices, such as air conditioners, microwaves, refrigerators, and other devices.

Approval: Plug, SPT-3: UL, C-UL

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This 50A RV/generator power cord can power large RVs that have the 50A locking style inlet, SS2-50. The male plug has a flat design that does not obstruct the RV pedestal cover from closing, while the female connector is the standard inline design.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This 3-prong NEMA L6-30P male assembly plug is rated at 30A and 250V. It is available in a yellow nylon body and includes the compression ring, gasket, and tight screw for easy wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

This temporary generator power cord is solidly built with an attractive black finish. It features a NEMA 14-50 plug and a CS6364 connector with a guiding pin for use with most high-power generator and power distribution units (PDU). The cable provides heat resistance up to 221°F.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

*Derated to 45 amps when the cable is longer than 50FT

This NEMA L14-20 assembly / replacement generator plug can be used as a replacement on an existing cord or for wiring on to a new cord needing this configuration style.

Max Grip Cable: OD: 18.5mm.

Approval: UL & C-UL

Limited one year warranty

This assembly plug features a NEMA L14-30, 30A locking configuration and a black nylon body. It is a straight, bladed grab cord type.

Max Grip Cable: OD ø18.5mm

Approval: UL, C-UL

Limited one year warranty