Contractor Power

This 30 Amp RV power cord connects to a 30A locking style RV inlet. It features an easy grip handle with a built-in LED power indicator light. The female connector also has a LED power indicator light and is angled at 45 degrees for strain relief to provide better leverage when attempting to lock into the inlet. The outer jacket comes in a bright yellow color to stand out in various lighting conditions.

Max Wattage: 3750W

Approval: Plug, connector and STW: UL, C-UL

Limited one year warranty

This temporary generator power cord is solidly built with an attractive black finish. It features a NEMA 14-50 plug and a CS6364 connector with a guiding pin for use with most high-power generator and power distribution units (PDU). The cable provides heat resistance up to 221°F.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

*Derated to 45 amps when the cable is longer than 50FT

This 50A RV/generator power cord can power large RVs that have the 50A locking style inlet, SS2-50. The male plug has a flat design that does not obstruct the RV pedestal cover from closing, while the female connector is the standard inline design.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This 50A locking assembly connector comes has a nylon body and is a grab cord type. It is similar to a CS6364 connector, but this connector does not include the center guiding pin. Use as a replacement for RV, boat, generator, or other devices. These connectors are used in many industrial applications as well.

Applicable Cable Types:

Gauge: 6/4 : Jacket types: ST, STW, STOOW, STOW, SOW, SOOW)

Gauge: 6/3 8/1: Jacket types: (ST, STW, STOOW, STOW)

Approval:UL & C-UL

Limited one year warranty

This 50 amp NEMA SS2-50 marine shore power locking assembly plug comes in a heavy duty steel body surrounded by a hardened plastic case. It also has a center hole for connecting to a CS6364 connector that has the center pin. It can be used for wiring on to an existing cord as a replacement or for adding on to a new power cord.

Approval: UL, C-UL

Limited one year warranty

This 50A, 250V locking assembly connector uses the CS8364 configuration. It is steel encased with an orange body. Use with generators, temp power, industrial settings, or anywhere this configuration style is needed.

Limited one year warranty

This 50A, 250V locking assembly plug has the CS8365 configuration. Use with generators, temp power, industrial settings, or anywhere this configuration style is needed.

Approval: UL, C-UL

Limited one year warranty

This 30A, L14-30R assembly / replacement connector is commonly used with generators and backup systems.

Max Grip Cable: OD 16.5mm.

Limited one year warranty

This locking generator connector has the NEMA L14-20R configuration. Use for wiring as a replacement on to an existing cord or for creating a new one that needs this configuration.

Max Grip Cable: OD 16.5mm.

Limited one year warranty