Contractor Power

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home / business, and run the wiring to a transfer switch / box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L14-30 male configuration rated for 30 amps, 125/250V.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 7500W

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L5-30 male configuration for small to midsize systems.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 3750W

Limited one year warranty

This 50A, 14-50 assembly connector can be used to wire a new cord or rewire an existing cord with the same configuration. It is a straight bladed, grab cord type with a black nylon body. The 14-50 configuration is commonly used with RVs, generators, electric vehicles, and industrial usage.

Limited one year warranty

This straight blade NEMA 14-50P assembly/replacement plug has a nylon body and is a grab cord type. It can be used to create or rewire a RV, generator, range, or other power cord that would use this configuration.

Limited one year warranty

This 30A TT-30R straight blade assembly/replacement connector can be attached to power cords that are commonly used with generators and RVs. It features a black nylon body and is a bladed grab cord type. The straight connector design allows it to connect directly to an inlet or other power cord.

Max Grip Cable: OD ø18.5mm

Limited one year warranty

This 30A assembly straight plug is designed for RVs and generators using this configuration. It has a standard inline design and is built with impact resistant nylon to withstand years of usage. The gasket, compression ring, and tight screw are all included.

Max Grip Cable: OD: 18.5mm

Limited one year warranty

This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.

Approval: UL & C-UL Listed

Limited one year warranty

This power cord has a molded NEMA L21-20 plug and three outlet boxes evenly spaced throughout the cord. Each outlet box has four NEMA 5-15/20 standard three prong household receptacles.

•Twelve total NEMA 5-15/20 receptacles

Limited one year warranty

This plug adapter converts a L5-30 outlet into a L5-20 outlet, allowing devices with that plug configuration to receive power. Since this adapter is not waterproof, it is not recommended to use in wet/damp locations.

Limited one year warranty