Adapters

This 30A pigtail adapter converts a TT-30 outlet, commonly found at RV parks and on generators, and allows a device with a L14-30 plug to receive power. It is ideal for powering a backup system with a L14-30 inlet box when only a TT-30 outlet is available on the generator. This adapter splits the single 125V hot wire from the TT-30 outlet to the two needed for the L14-30 connection.

Max Power: 3750W

Approval: STW, Connector: UL, C-UL

Limited one year warranty

This adapter converts a CS6364 outlet that is commonly found on large generators or used with marine shore power to a 6-50 outlet that is commonly used for large welders.

Max Power: 12500W

This adapter cord converts the 50A locking style into the 50A straight blade outlet, commonly used for Tesla charging, temp power, power distribution units, and other purposes.

Limited one year warranty

This 50A adapter plugs into a CS6365 / SS2-50 outlet commonly used with generators and allows devices using a 10-50 plug, such as welders and older appliances, to receive power.

Limited one year warranty

GFCI (Ground Fault Circuit Interrupter) provides personal protection from ground faults and open neutral conditions for the job site, plant floor or workshop. GFCI is UL listed and meets OSHA specifications. When using a GFCI adapter for an outlet that is not protected, the adapter should always be placed nearest the outlet (GFCI then the extension cord).

This GFCI pigtail adapter has a NEMA 5-15 Loc-King plug and connector that can be used with other products in the series. The male plug has a Secure Twist Ring that easily fastens around the connector to keep the cords firmly attached, while the connector includes a protective cap to cover it when not in use. The bright green outer jacket helps this adapter stand out from other power cords.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

This 30A pigtail cord has a NEMA L5-30 female connector is angled downward at a 45° angle for strain relief. It also has a built-in LED power indicator light and a threaded ring that screws around the inlet. The supply end has the outer jacket removed by 40mm for easily wiring an assembly plug. This pigtail adapter is designed for RV power applications.

Approval: Connector, STW: UL, C-UL

Limited one year warranty

This pigtail adapter is commonly used for generators or in industrial settings. It has a male L6-20P plug and a female L6-30R connector that are fully molded.

Approval: Plug, Connector, and SJTOW: UL, C-UL

Limited One Year Warranty

This NEMA L6-20P to NEMA 14-50R pigtail adapter is useful for powering a large RV, EV charger, or other devices.

This generator pigtail adapter plugs into a L5-30 outlet and allows a device with a L14-30 plug to receive power. It is commonly used to connect a power inlet box with a L14-30 configuration to a generator without having to rewire the setup. The single 125V hot wire from the L5-30 configuration is split to provide power to both hot wires needed for the L14-30. Both the male plug and female connector are fully molded on this adapter.

Max Power: 3750W

Limited One Year Warranty

This pigtail adapter has a molded 20A, NEMA L5-20, male plug that is commonly found on generators. The T-slot design on the female connector accepts devices using a straight blade 15A (NEMA 5-15) or a 20A (NEMA 5-20) plug. The female connector also features a built-in power indicator light that illuminates when the power is connected.

Max Power: 2500W

Approval: UL & C-UL Listed

Limited One Year Warranty

This locking adapter converts a NEMA L14-30 outlet, commonly found on generators, and allows devices with a NEMA L6-30 plug to receive power without having to install a new outlet.

Max Power: 7500W

Limited One Year Warranty

This pigtail adapter allows a device with a 3 prong locking 30A 125V  (L5-30) plug to connect to a 4 prong 30A 125/250V (L14-30) outlet. It is ideal for powering RVs, boats, and equipment with a L5-30 plug from a generator or other power source with a L14-30 outlet. Due to the higher voltage L14-30 outlets have, one of the hot wires is left empty in this adapter to prevent equipment from burning out.

Limited One Year Warranty

This generator pigtail adapter powers devices with a L14-20 plug from a L14-30 outlet.

Max Power: 5000W

Limited One Year Warranty

This adapter is useful for attaching industrial equipment with a 6-50 plug to 4-prong, locking, 30A outlets. The L14-30 configuration is commonly found on most mid to large size portable generators, as well as industrial wall outlets. It is an ideal adapter for powering a welder from a generator that has a L14-30 outlet.

Max Power: 7500W

Limited One Year Warranty

This pigtail adapter has a NEMA L14-30 plug, commonly used with generators, and a NEMA 6-15/20 connector for air conditioners, EV chargers, machines, and power tools.

Limited One Year Warranty